Backupsuite 13.7 (kompletná záloha image)

Moderátor: Moderátoři

Příspěvky: 35
Registrován: 22 lis 2014 14:31

Backupsuite 13.7 (kompletná záloha image)

Příspěvekod BIGG BOSS » 18 bře 2015 23:09

Backupsuite 13.7(systémový plugin na vytvorenie kompletnej zálohy image )

Changed in version 13.7
- Removed some obsolete code which could generate an error in some cases
- made some parts more modular

Pre vytvorenie zálohy 1:1 je potrebné použiť horeuvedený plugin backupsuite

Inštalácia backupsuite pluginu:

1. Pluginy -> stiahnút pluginy z prílohy -> rozbaliť do dresára > nakopírovať cez FTP do tmp/enigma2-plugin-extensions-backupsuite_13.7_mips32el.ipk
2. prihlásime sa do stb cez Putty a zadáme príkaz opkg install /tmp/*.ipk, necháme pokiaľ sa uvedený plugin naištaluje..

*V prijimači si uvedený plugin Backupsuite 13.7 vyhľadáme cez Hlavné MENU/Nastavení/Full back up

Vytvorenie zálohy:

POZOR !! Najprv sa musíme presvedčiť, či máme v stb zadanú srpávne cestu na vytvorenie zálohy image. K bezproblémovému vytvoreniu zálohy odporúčam "inicializovať, resp mountnúť" USB kľúč, alebo HDD.

* Usb sformátované v počítači na fat32 vložíme do vypnutého prijímača , až potom ho zapneme do siete. Ak sa nám nepripojí automaticky, musíme ho "inicializovať, resp mountnúť". Bežne dostupné image E2 to majú už položke MENU/NASTANENIE/SYSTEM/PEVNY DISK/INICIALIZACIA, alebo v ponuke PLUGIN na to slúži DEVICE MANAGER (je súčasťou pluginu GlassSystemUtility )

alebo je aj iný spôsob, ktorý so opíšeme nižšie..

Spustíme telnet/alebo PUTTY manager login:root , pass:dreambox (heslo podľa typu prijímača)
2. zadáme/ sfdisk -l #to nám ukáže cestu k usb
3. zadáme/ umount /dev/sda1 #týmto príkazom urobíme umout usb, ak je usb na sda1,ak je na sdb1 zadáme
opačne.
4. zadáme/ mkfs.ext3 /dev/sda1 # týmto príkazom spustíme formátovánie usb, chviľku to trvá
5. zadáme/ mount /dev/sda1 /media/usb #týmto príkazem moutneme usb
6. zadáme/ df -h #to nám ukáže či sa nám usb opäť mountlo
Podobne môžeme sformátovať aj hdd v prijímači


Záloha na HDD/USB:
1. Pluginy -> Full back-up on HDD/USB
2. Potvrďte vytvorenie zálohy
3. Záloha sa bude vytvárať niekoľko minút

Obrázek
enigma2-plugin-extensions-backupsuite_13.7_mips32el.zip
Nemáte oprávnění prohlížet přiložené soubory.
Obrázek
Obrázek

shamann
Administrátor
Příspěvky: 3400
Registrován: 21 lis 2014 20:53

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod shamann » 19 bře 2015 11:21

POZOR!!! nie je to univerzalny plugin je urceny len pre Clark Tech/Xtrend etXX00, all models VU+ and MK-Digital XP1000 dalej si vyzaduje mat nainstalovane v image mtd-utils (nandump, support ubifs atd...) a dalej dolezite: spravi backup typu ubifs

Příspěvky: 198
Registrován: 17 dub 2015 12:20

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod vusolo2 » 06 zář 2015 16:16

Backupsuite 18.0

oQDmV2.jpg


The problems still persists in the 3rd-party feed for the et4x00 and et8000. The other models can be updated/upgraded online

To update your receiver and the backupsuite:
- remove/uninstall the BackupSuite if there is still an copy installed
- Run an update via the menu
- Copy attached version of the BackupSuite to your receiver to /tmp/
- In telnet give the commandopkg install /tmp/enigma2-plugin-extensions-backupsuite_1.0+git13+82ffd34-r0_mips32el.ipk

This install the right version, you can't upgrade the backupsuite online until the problems are solved

What's new:
Changed in 18.0
- Added messagebox to confirm the start of the backup process of the HDD and USB option
- Added support for the Xtrend ET7000 and ET7500
- Added support for the Mutant/Opticum HD2400 and the Mutant HD1100
test pli 4 vusolo 2 ok.

Thx to Pedro_Newbie

enigma2-plugin-extensions-backupsuite_1.0+git13+82ffd34-r0_mips32el.ipk
Nemáte oprávnění prohlížet přiložené soubory.

Příspěvky: 198
Registrován: 17 dub 2015 12:20

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod vusolo2 » 16 led 2016 14:40

Backupsuite git89


Changelog
=========
Git 89 06-01-2016
Back to normal screens

Git 88 01-01-2016
Happy New Year!

Git 87 29-12-2015
It is for me near impossible to add all enigma2 receivers on the market, just by the lack of time and missing the inside information about the receivers.
Therefore I added the ability to maintain your own lookuptable.txt in /etc.
If you want to add a receiver which isn't supported by me, just copy the lookuptable.txt to /etc and edit this table with the right parameters.
The file lookuptable.txt in /etc is safe for updates so you can build your own list with supported receivers.
If you place the file lookuptable.txt in /etc this file will be the one that's used to create the back-up's.
If there is no file in /etc then the standard file supplied by the BackupSuite is used.
If you want a certain receiver to be supported just ask the image maker to add a lookuptable.txt in the folder /etc or ask for the parameters to be used.

Git 86 20-12-2015
Did some overdue maintenance on plugin.py concerning the VU+ models

Git 85 13-12-2015
Added support for the VU+ Solo 4K. Beware: this is a very early test, the plugin still needs some tidying up.
Don't try to flash the made back-up of the Solo 4k with the built in OFGWRITE, it needs an update to be able to flash the Solo 4K
Reverted the truncating of the kernelpartition

Git 84 06-12-2015
Added seasons greetings

Git 83 30-11-2015
Added support for the Xsarius Fusion HD SE
Corrected the extra path for the Xsarius HD

Git 82 14-11-2015
Completed support for the Xsarius Fusion HD (at the moment still no confirmation if it functions), looking for some owners of a Fusion who would like to test it and report if all is functioning as it should.
Removed the support for unknown devices.

Git 81 10-11-2015
Added support for Xsarius Fusion HD (very experimental, use with care!)

Git 80 25-10-2015
Temporary measure: bail out if the receiver is a VU+ Solo 4K until more is known what the requirements are to make a working back-up
Lookuptable expanded with the entry Solo4K

Git 78 & 79
Git 78 has been canceled/reverted by Git 79

thx @Pedro_Newbie
enigma2-plugin-extensions-backupsuite_20+git89_mips32el.rar
Nemáte oprávnění prohlížet přiložené soubory.

Příspěvky: 198
Registrován: 17 dub 2015 12:20

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod vusolo2 » 16 úno 2016 06:45

Backupsuit-git92


Changelog
=========
Changelog
=========
Git 92 14-02-2016
Some big changes, at first now it is possible to maintain your backups from the plugin.
With the blue button you are now able to delete the backups you want to get rid of.
Please bear in mind that this only works for the backups created with this or any newer version of the BackupSuite.
If you want to be able to do this also for your older backups then you'll have to move the files:
imageversion from the data folder to the folder above (in the folder right under the folder /fullbackup_<model/<date_time>/ )
Big thanks to Tension for the changes

Also debugged a bit for the Solo4k, now you should be able to make a backup from the solo4k. There is still some work to do but for now it should work.
Please remember: the solo4k backup can't be restored by the BackupSuite using the ofgwrite utility (yet).
Thanks Findex for doing some testing with his Solo4k!

Git 91 08-02-2016
Added support for the Zgemma
- Star S / Star 2S
- H5
- H.S / H.2S / H.2H

Git 90 31-01-2016
Added support for the upcoming Golden Interstar LX Class S2 and C

thx @Pedro_Newbie

enigma2-plugin-extensions-backupsuite_20+git92_mips32el.rar
Nemáte oprávnění prohlížet přiložené soubory.

Příspěvky: 198
Registrován: 17 dub 2015 12:20

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod vusolo2 » 29 čer 2016 05:43

Backupsuit-git104

whats new:

Changelog
=========
Git 104 29-05-2016
Added support for the Mut@nt HD 1265

Git 103 28-05-2016
Added support for the Miraclebox Premium Twin+

Git 102 25-05-2016
Added support for the Spycat and the Spycat Mini

Git 101 13-04-2016
Added support for the Xsarius Pure HD

Thx@pedro_Newbie
enigma2-plugin-extensions-backupsuite_20+git104_mips32el.ipk
Nemáte oprávnění prohlížet přiložené soubory.

Příspěvky: 198
Registrován: 17 dub 2015 12:20

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod vusolo2 » 21 srp 2016 19:53

Backupsuit

Git 110
20-08-2016
Added support for the Formuler F4

Git 109
19-08-2016
Added support for online flashing of the image backup of a Vu+ Solo4k.
Betacentauri changed his execellent tool to make this possible, thanks Betacentauri!

Git 106-108
Merged pull request from Dima73 which adds the Ukrainian language by vovan43. Thanks!

Git 105
Added support for the Galaxy Innovations (GI) ET7000 Mini

Thx @ Pedro_Newbie

enigma2-plugin-extensions-backupsuite_20+git110_mips32el.ipk
Nemáte oprávnění prohlížet přiložené soubory.

Příspěvky: 29
Registrován: 26 pro 2015 13:43

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod slakosko4 » 02 lis 2016 20:11

nedá sa použiť plugin na hd box enibox,openpli

Příspěvky: 24
Registrován: 26 pro 2014 18:36

Re: Backupsuite 13.7 (kompletná záloha image)

Příspěvekod abba » 27 úno 2020 08:16

vusolo2 píše:Backupsuit-git92


Changelog
=========
Changelog
=========
Git 92 14-02-2016
Some big changes, at first now it is possible to maintain your backups from the plugin.
With the blue button you are now able to delete the backups you want to get rid of.
Please bear in mind that this only works for the backups created with this or any newer version of the BackupSuite.
If you want to be able to do this also for your older backups then you'll have to move the files:
imageversion from the data folder to the folder above (in the folder right under the folder /fullbackup_<model/<date_time>/ )
Big thanks to Tension for the changes

Also debugged a bit for the Solo4k, now you should be able to make a backup from the solo4k. There is still some work to do but for now it should work.
Please remember: the solo4k backup can't be restored by the BackupSuite using the ofgwrite utility (yet).
Thanks Findex for doing some testing with his Solo4k!

Git 91 08-02-2016
Added support for the Zgemma
- Star S / Star 2S
- H5
- H.S / H.2S / H.2H

Git 90 31-01-2016
Added support for the upcoming Golden Interstar LX Class S2 and C

thx @Pedro_Newbie

enigma2-plugin-extensions-backupsuite_20+git92_mips32el.rar

Jaký backupsuit je vhodný pro Formuler 4 Turbo. / E2 , openpli 7,2, oscam. Děk.


Zpět na Plugins

Kdo je online

Uživatelé procházející toto fórum: Žádní registrovaní uživatelé a 0 návštevníků