Diskusia

[tomili]

You are right Sir, this is not the skin's fault ... the yttrailer plugin is to blame for everything. The plugin has been deleted, everything works fine

1.jpg

[shamann]

ok, thx for the info... btw editing of FHDG is not needed anyway - FHDG autopatch working well - comparisition of skin.xml before and after editing

[9000peter]

Hoj Shamann v novej verzii ATV 6.4 pod FHDG17 nefunguje flash online dá sa to poriešiť? Ináč ostatné vyzerá byť v poriadku Ď.

[9000peter]

Takže už je to v poriadku neuvedomil som si aktualizáciu a po reštart boxu ok.

[OnePlus1968]

from ver. 3.06 ....

Kód: Vybrat vše

...
- DOWNLOAD MENU: updated piconCam
- added CI info into enhanced info in extra infobar
...

Hi, greet everyone.
The skin in image that number matches (ExtraScreenGalery)?
Thanks for all.

[shamann]

Hi, greet everyone.
The skin in image that number matches (ExtraScreenGalery)?
Thanks for all.

Hi

this is Extra Screen: 62 but sidebar (at left) can be enabled in many modes following by settings in the setup of FHDG and CI info in this one are available from ver. 3.06 this version is not public yet you have to be patience and wait for the next update ...

[9000peter]

Hoj.Shamann.
Dalo by sa toto okno upraviť (roztiahnuť) pod fhdg17 alebo je to problém E2. Ide o ten dátum poslednej aktualizácie image ATV 6.3 ,6,4.Ď.

[OnePlus1968]

Hi, greet everyone.
The skin in image that number matches (ExtraScreenGalery)?
Thanks for all.

Hi

this is Extra Screen: 62 but sidebar (at left) can be enabled in many modes following by settings in the setup of FHDG and CI info in this one are available from ver. 3.06 this version is not public yet you have to be patience and wait for the next update ...

Thanks Shamann
How can I eliminate that kind of halos indicated by the arrows?
Thanks again.

[shamann]

Hoj.Shamann.
Dalo by sa toto okno upraviť (roztiahnuť) pod fhdg17 alebo je to problém E2. Ide o ten dátum poslednej aktualizácie image ATV 6.3 ,6,4.Ď.

vyzera to na chybu v image(zrejme "team" pridal /t omylom do vypisu), skus v dalsej ci si to neopravia, obsah vypisu vytvara samotne image, skin neovplyvnuje obsah

[shamann]

Thanks Shamann
How can I eliminate that kind of halos indicated by the arrows?
Thanks again.

go to the setup of FHDG chapter OTHERS and set to yes/no option "Enable CAID PIDs" ....mean "no" - do not display

[OnePlus1968]

Thanks Shamann
How can I eliminate that kind of halos indicated by the arrows?
Thanks again.

go to the setup of FHDG chapter OTHERS and set to yes/no option "Enable CAID PIDs" ....mean "no" - do not display

No Shamann
I am not referring to windows but to transparent trails at the edges.

[a.baloo]

Ahoj Shamann, zmenil som prijmac za VU+ Duo 4K. Zostal som pri image OpenATV 6.3 a vo FHD Glass17 mi nezobrazi Pocasie po stlaceni tlacidla HELP, ktore mam navolene v nastaveniach FHD G17. V Dreamboxe 7020HD mi to v tomto image fungovalo. Konfiguraciu som si ulozil z DM a vo VU+ ho obnovil. Vies mi prosim poradit co mam skontrolovat pripadne upravit? Dik

[shamann]

No Shamann
I am not referring to windows but to transparent trails at the edges.

this a part of graphics of extrascreen, if you can change it you have to do by creating own and rewriting or copy as new and edit in /usr/lib/enigma2/python/Screens/G17screens.py

[shamann]

Ahoj Shamann, zmenil som prijmac za VU+ Duo 4K. Zostal som pri image OpenATV 6.3 a vo FHD Glass17 mi nezobrazi Pocasie po stlaceni tlacidla HELP, ktore mam navolene v nastaveniach FHD G17. V Dreamboxe 7020HD mi to v tomto image fungovalo. Konfiguraciu som si ulozil z DM a vo VU+ ho obnovil. Vies mi prosim poradit co mam skontrolovat pripadne upravit? Dik

standardne nie je treba nic specialne nastavovat, staci ak aktivujes nejaku moznost pre "help" spusti sa a funguje, skus to zmenit na nieco ine ...

[a.baloo]

Po zmene v nastaveniach FHDG17 na ine rozsirene info, sa tak isto nic nezobrazilo. Laborovanim v nastaveniach OpenATV som prisiel na to, ze tento image pouziva fyzicke tlacidlo na ovladaci oznacene ako "HELP" vo svojom software ako tlacidlo "INFO". Tu istu funkciu ma aj dalsie tlacidlo na ovladaci a to tlacidlo "EPG". Vsade v nastaveniach ked menim funkciu nastavenia pre tlacidlo INFO, tak to meni funkciu, ktore ma na ovladaci popisku "HELP". Dalo by sa nejakou upravou pre FHDG17 zmenit to vyvolanie pocasia na tlacidlo INFO, kedze tento image pre tento STB nepocita vobec s tlacidlom HELP, resp. zmenili jeho funkciu na INFO? Snad som to popisal zrozumitelne . dik

[shamann]

mozes sa skusit pohrat/zmenit mapovanie v /usr/lib/enigma2/python/Plugins/Extensions/setupGlass17/keymap.xml

[a.baloo]

dik za nakopnutie, po uprave to funguje, este raz vdaka za radu

[OnePlus1968]

No Shamann
I am not referring to windows but to transparent trails at the edges.

this a part of graphics of extrascreen, if you can change it you have to do by creating own and rewriting or copy as new and edit in /usr/lib/enigma2/python/Screens/G17screens.py

<screen name="ExtraInfo17" flags="wfNoBorder" position="0,0" size="1920,1080" backgroundColor="transparent">
<ePixmap position="0,0" zPosition="-2" size="1920,1080" pixmap="hd_glass17/general/infobar-ex.png" alphatest="off" />

[shamann]

<screen name="ExtraInfo17" flags="wfNoBorder" position="0,0" size="1920,1080" backgroundColor="transparent">
<ePixmap position="0,0" zPosition="-2" size="1920,1080" pixmap="hd_glass17/general/infobar-ex.png" alphatest="off" />

this:

<widget name="caidPids_back" position="1609,45" size="255,600" pixmap="hd_glass17/menu/back_caidPids-fs8.png" alphatest="off" zPosition="0" />

<widget name="caidPids_end" position="1609,115" size="255,30" pixmap="hd_glass17/menu/end_caidPids-fs8.png" alphatest="off" zPosition="3" />

<widget name="back_enhanced" position="60,60" size="465,660" pixmap="hd_glass17/menu/back_enhanced-fs8.png" alphatest="off" zPosition="0" />

[tomili]

Dear shaman, after updating the skin, I can’t change the color ...

[shamann]

Dear shaman, after updating the skin, I can’t change the color ...

I am sorry, it will be fixed in the next update but you can fix it by yourself now by this way:

1. unzip "hdg17Screens.xml" from attachment
2. go to the setup of FHDG and select/change channel selection type to "default" type - save - wait for autorestartGUI
3. copy/overwrite unziped "hdg17Screens.xml" to dm to:

Kód: Vybrat vše

/usr/lib/enigma2/python/Plugins/Extensions/setupGlass17/

4. go to the setup of FHDG and select/change channel selection type to your favorite type - save - wait for autorestartGUI
5. done and color change will be accepted

[tomili]

Dear shaman, after updating the skin, I can’t change the color ...

I am sorry, it will be fixed in the next update but you can fix it by yourself now by this way:

1. unzip "hdg17Screens.xml" from attachment
2. go to the setup of FHDG and select/change channel selection type to "default" type - save - wait for autorestartGUI
3. copy/overwrite unziped "hdg17Screens.xml" to dm to:

Kód: Vybrat vše

/usr/lib/enigma2/python/Plugins/Extensions/setupGlass17/

4. go to the setup of FHDG and select/change channel selection type to your favorite type - save - wait for autorestartGUI
5. done and color change will be accepted

Thank you .... everything is fine

[kostik123456]

Ahoj shamann, po aktualizácii na FHDGlass17 ver.3.11 sa posunul infobar č.62 ku krajom a nedá sa to nijak nastaviť v najnovšom image Merlin prijímač DM900.
Vieš to prosím opraviť aby sa správne zobrazoval ako v predošlej verzii prosím viz. náhlad. Ostatné infobary sú OK, skúšal som to.

[shamann]

Ahoj shamann, po aktualizácii na FHDGlass17 ver.3.11 sa posunul infobar č.62 ku krajom a nedá sa to nijak nastaviť v najnovšom image Merlin prijímač DM900.
Vieš to prosím opraviť aby sa správne zobrazoval ako v predošlej verzii prosím viz. náhlad. Ostatné infobary sú OK, skúšal som to.

nie je co opravovat, upravil som ho na celu obrazovku, nastav si korektne zobrazovanie na svojej TV, zakaz presah obraz. rozlisenia, moze sa to rozne volat u tvojho tv to moze byt inak nazvane - tato funkcia nastavi zobrazenie celeho obrazu, nie orezaneho

[kostik123456]

Ahoj shamann, po aktualizácii na FHDGlass17 ver.3.11 sa posunul infobar č.62 ku krajom a nedá sa to nijak nastaviť v najnovšom image Merlin prijímač DM900.
Vieš to prosím opraviť aby sa správne zobrazoval ako v predošlej verzii prosím viz. náhlad. Ostatné infobary sú OK, skúšal som to.

nie je co opravovat, upravil som ho na celu obrazovku, nastav si korektne zobrazovanie na svojej TV, zakaz presah obraz. rozlisenia, moze sa to rozne volat u tvojho tv to moze byt inak nazvane - tato funkcia nastavi zobrazenie celeho obrazu, nie orezaneho

To mám zakázané stále v TV, z tým vôbec nič nerobím. Ako som písal tak infobary 61 a 63 ktoré sú podobné niesú tak roztiahnuté ako infobar č.62, škoda...
V predošlej verzii 3.05 to bolo korektné... tam to bolo OK, toto zobrazenie je len tak tak na krajoch.
Skús to u seba zmeniť a uvidíš sám, zdá sa mi to neprirodzené.
Škoda, že nemám nijaký screen z predošlých verzií z infobarom na porovnanie aby si mi veril.
Pekný večer.